Surface Cleaning

Give your outdoor surfaces a fresh, clean look with professional surface cleaning for pavers, concrete, stone, and more. We safely remove dirt, algae, and stains so your property looks bright and well cared for again.

+1 305-922-6049

Our Services

Get in touch

+1 305-922-6049

Tell us about your project and we’ll follow up with a clear, no‑pressure quote and timeline.

Surface Cleaning Done The Right Way

Surface cleaning is the first step in restoring the look and safety of your outdoor areas. Over time, driveways, patios, and pool decks collect dirt, algae, mold, and stains that normal hosing cannot remove. We use professional‑grade equipment and the proper cleaning methods for each surface to lift away buildup without causing damage.

Our team adjusts water pressure, temperature, and cleaning solutions depending on whether we are working on pavers, concrete, natural stone, or other materials. This tailored approach helps protect the surface while delivering deep, even cleaning from edge to edge. The result is a brighter, more attractive space that looks newer and feels better underfoot.

Surfaces We Clean

We clean a wide range of exterior surfaces around your home, including:

Paver driveways and walkways
Paver, concrete, and travertine pool decks
Concrete driveways, sidewalks, and curbs
Front porches, entryways, and patios
Natural stone, tile, and decorative concrete
Screened‑in lanais and outdoor living areas
Low walls, steps, and other hardscape features

If you are not sure whether a surface can be cleaned safely, we can inspect it and recommend the best approach.

Why Professional Surface Cleaning Matters

Better curb appeal: A clean driveway, sidewalk, and entry instantly make your home look more welcoming and well maintained.
Safer surfaces: Removing algae, mildew, and grime reduces the risk of slick, slippery spots, especially around pool areas and shaded walkways.
Protects your materials: Using the right pressure and detergents helps prevent etching, streaking, or other damage that can happen with DIY equipment.
Ideal prep for sealing: Proper cleaning is essential before sealing pavers, concrete, or stone so protective coatings bond and last longer.

Our Surface Cleaning Process

We start with a walk‑through of your property to identify problem areas, stains, and any delicate materials that need special care. Next, we apply appropriate cleaners to break down organic growth, oils, and built‑up grime. Using professional surface cleaners and wands, we then rinse away contaminants in a controlled, even pattern that avoids tiger‑stripes or swirl marks.

Once the main cleaning is complete, we detail edges, corners, and tight spots that large equipment cannot reach. For pavers and other hardscape surfaces, we can follow up with re‑sanding and sealing if you want added protection and a longer‑lasting clean. Throughout the process, we work carefully around landscaping, screens, and outdoor furniture to respect your property.

Pressure Washing vs. Soft Washing: Which Does Your Surface Need?

“Surface cleaning” covers both pressure washing and soft washing, and knowing which one to use is the difference between a great result and an expensive mistake. Pressure washing uses high-pressure water, often 1,300 to 4,000+ PSI, and is well suited to durable surfaces like concrete driveways and sealed pavers. Soft washing uses low pressure, well under 700 PSI, combined with a cleaning solution that lifts algae, mold and stains without the mechanical force.

The catch: pointing a pressure washer directly into paver joints, or using too much pressure on the wrong surface, can blast out joint sand and wear down the paver’s surface layer, exposing it to moisture and staining that gets worse over time. This is one of the most common ways a DIY pressure washing job or an inexperienced crew can shorten the life of a paver driveway. We choose the pressure, angle and equipment based on the actual surface, not a one-setting-fits-all approach, and we know how to protect the joints while still getting the surface fully clean.

How Often Should You Pressure Wash in South Florida?

Most Florida driveways, walkways and patios need pressure washing every 6 to 12 months. Unlike colder climates, we don’t get a winter freeze that kills off algae and mold, so it’s a year-round problem here, and heat and humidity keep it coming back. Shaded areas or surfaces near heavy landscaping often need cleaning closer to the 6-month mark, while sunnier, more open areas can sometimes stretch toward 12. If your surface is already sealed, buildup is generally slower to take hold and easier to rinse away.

Pressure Washing and Paver Sealing Work Together

Cleaning and sealing aren’t the same service, but they’re most effective done together. Pressure or soft washing removes the dirt, algae and old buildup sitting on the surface, and sealing is what actually protects the pavers going forward and keeps that buildup from coming back as fast. If your pavers haven’t been sealed in a while, this is a natural time to do both. See our paver sealing service for what that process involves.

What Affects the Cost of Pressure Washing

Pricing depends on the size of the area, how much buildup has to be removed, and which surfaces are involved. As a general reference point, pressure washing in South Florida commonly runs in the range of a few cents per square foot for driveways and larger areas, with pricing scaled up for heavier staining or more delicate surfaces that need a slower, more careful approach. We quote after seeing the property so the number reflects your actual job. Request a free estimate for a clear price before we start.

How often should I have my surfaces professionally cleaned?

Most homeowners schedule surface cleaning once a year, or more often in shaded, damp, or high‑traffic areas that grow algae quickly. The right frequency depends on your environment and how quickly buildup returns.

Can you remove tough stains like rust or oil?

Many rust, tire, and light oil stains can be significantly reduced or removed with specialized treatments, though results vary by surface and how long the stain has been there. We will evaluate the stains on‑site and explain what you can expect.

Is pressure washing safe for all surfaces?

Not every surface should be blasted with high pressure. We adjust techniques and, when needed, rely more on the right cleaners and lower pressure to safely clean softer materials, older concrete, or delicate stone.

Do I need to be home during the service?

As long as we have access to the areas being cleaned and an outdoor water source, you do not have to be home. We will coordinate everything in advance and keep you updated on start and finish times.

What's the difference between pressure washing and soft washing?

Pressure washing uses high-pressure water, typically 1,300 to 4,000+ PSI, and works well on durable surfaces like concrete and sealed pavers. Soft washing uses low pressure under 700 PSI with a cleaning solution, which is gentler and better suited to more delicate surfaces. We choose the method based on what you actually have.

Will pressure washing damage or loosen my paver joints?

It can, if it’s done wrong. Pointing high pressure directly into the joints can blast out the sand and wear down the paver’s surface. We adjust pressure, angle and technique specifically to avoid that, and we re-sand any joints that need it afterward.

Is surface cleaning the same thing as pressure washing?

It’s closely related. Surface cleaning is the broader service, and pressure washing (along with soft washing) is how we actually do it, depending on the material. We use whichever method fits your driveway, patio, or pool deck.

Do I need to seal my pavers every time I have them pressure washed?

No, but it’s worth considering if it’s been a while. Cleaning removes what’s built up on the surface; sealing is what protects it going forward and slows down how fast buildup returns. Many customers do both together to make the most of the visit.

Can I just rent a pressure washer and do this myself?

You can, but it’s easy to cause real damage without realizing it, especially on pavers, where the wrong pressure or angle can strip joint sand or wear down the surface. A professional job also gets into edges and tight spots that consumer equipment usually misses.

Our Clients Testimonials

South Florida homeowners trust us to clean, sand, and seal their pavers the right way the first time, here’s what they’re saying after seeing their driveways, patios, and pool decks transformed.