This project showcases a full restoration and sealing of a modern gray concrete paver driveway for a single‑family home in Miami, FL. The pavers were structurally sound but looked dull, uneven in color, and had weeds growing between the joints.
Tell us about your project and we’ll follow up with a clear, no‑pressure quote and timeline.
Location: Miami, Florida
Service: Driveway paver cleaning, restoration, and sealing
Surface: Textured gray concrete pavers in a modular pattern
Goal: Restore the dark gray tone, stop weed growth, and protect the surface from sun, rain, and tire marks.
Heavy UV exposure causing noticeable fading of the original gray color.
Organic growth and weeds in the joints, especially toward the street side of the driveway.
Embedded dirt and tire traffic made the pavers appear blotchy and uneven.
We started by thoroughly cleaning the entire driveway with professional washing equipment to remove surface dirt, mildew, and tire marks while preserving the paver texture. Proper cleaning is essential so the sealer can bond evenly and last longer.
After washing, we cleared out loose debris and remaining weeds from the joints, then added fresh sand to stabilize the pavers and help lock everything in place. Well‑filled joints reduce weed growth and keep the surface from shifting under vehicle traffic.
Once the surface was completely dry, we applied a high‑quality paver sealer designed for South Florida conditions, helping protect against erosion, mold, and fading from the Florida sun. The sealer enhanced the natural gray color of the pavers, giving them a richer and more uniform appearance without making the driveway slippery.
The finished driveway now has a deeper, more consistent gray tone that complements the home’s exterior and roof. The joints are clean and tightly filled, greatly reducing weed growth and making ongoing maintenance much easier for the homeowner.
If your driveway pavers in South Florida look faded, stained, or full of weeds, our expert paver sealing team can restore and protect them with the same multi‑step process used on this project. Contact Pavers Sealing Expert today for a free estimate on paver sealing, restoration, or new paver installation in Miami and the surrounding areas.
Most driveway paver sealing projects in Miami last about 2–3 years before a maintenance coat is recommended, depending on traffic, sun exposure, and how well the surface is maintained.
No. We use a penetrating or low‑sheen sealer designed for driveways, and we adjust the application so the pavers keep their natural texture and traction, even when wet.
Sealing itself does not remove stains, which is why we perform a thorough cleaning and stain treatment first. Once clean, the sealer helps even out the color and makes future stains much easier to wash off.
Yes. After cleaning, we refill the joints with sand to stabilize the pavers and reduce weed growth and shifting before applying the sealer.
You can usually walk on the pavers after 4–6 hours, but we recommend waiting 24–48 hours before parking vehicles so the sealer can fully cure.
Sealing greatly reduces weed growth by locking in the joint sand and protecting the gaps, but no solution can stop it 100%. Occasional spot treatment or hand‑pulling may still be needed.
South Florida homeowners trust us to clean, sand, and seal their pavers the right way the first time, here’s what they’re saying after seeing their driveways, patios, and pool decks transformed.
Broward County, Miami-Dade County, & Monroe County
